Sensor, RPM
|
|
|
RPM sensor used on SportsArt models: 3007, 6005
NOTE: This is only used on the newer style machines and if this does not look like the one on their machine they would need to order the assembly 38000087, which comes with a new RPM sensor, a disk and a new mounting bracket. |
* Images may not be identical to part.
# |
Part Name (Click to view) |
BOM
Qty | D001 | NLA Cover, Handrail, Left, Upper | 1 | D002 | Cover, Handrail, Left, Lower | 1 | D003 | Screw | 6 | D004 | STICKER-LEFT | 1 | D005 | Screw | 6 | D006 | End cap - Handlebar | 2 | D009 | HANDRAIL WASHER D20*d7*t2.0 | 4 | D010 | Screw | 4 | D011 | LONG HANDRAIL SUPPORT | 2 | D014 | Screw | 2 | D017 | FLAT WASHER D17*d8.3*t1 | 4 | D018 | Screw | 4 | D019 | Handrail, Base, Long | 2 | D020 | LONG HANDRAIL BASE COVER A | 2 | D021 | Screw | 4 | D022 | Cover, Long Handrail, Upper, Right | 1 | D023 | Cover, Long Handrail, Lower, Right | 1 | D024 | Sticker, Right | 1 | D401 | LONG HANDRAIL-LEFT | 1 | D402 | LONG HANDLEBAR-RIGHT | 1 | D405 | NLA LONG HANDRAIL-LEFT Assembly | 1 | D406 | NLA LONG HANDRAIL Assembly-RIGHT | 1 | D408A | NLA SUPP PLATES&COVERS-LONG HNDRL | 1 | F001 | CABLE | 1 | F002 | MSHRM PH SCREW M4*L8 | 2 | F003 | FAN VENT | 1 | F004 | PH SCREW M3*P0.5*L6 | 2 | F006 | FAN VENT BRACKET | 1 | F007 | NYLON RIVET | 2 | F008 | FAN STICKER | 1 | F009 | FAN CONTROL BOARD | 1 | F010 | Cushion, Key, White | 1 | F011 | Screw | 3 | F012 | FAN KEY BOARD | 1 | F013 | BAKELITE SLEEVE D9*d5.1*L8 | 3 | F014 | BRACKET FOR FAN KEY BRD | 1 | F015 | MSHRM PH SCREW M4*L8 | 3 | F016 | STICKER -ROUND D19*t0.25 | 1 | F018 | Screw, Phillips Head | 2 | F020 | WIRE, FAN | 1 | F021 | FAN BRACKET | 1 | F022 | PH SCREW M4*P0.7*L43 | 1 | F402 | FAN COVERS | 1 | F403 | FAN BOX COVER | 1 | F404 | FAN VENT AND BRACKET | 1 | F405 | FAN VENT WITH RIVET | 1 | F406 | FAN BRACKET | 1 | H001 | IHP BOARD | 1 | H002 | PH SCREW M3*L12 | 2 | H003 | CABLE - IHP TO USB | 1 | H004 | CABLE -DISPLAY TO USB | 1 | 4 | ROUND STICKER D18*t0.25 | 1 | 5 | TRIANGULAR STICKER | 1 | 11 | Screw, Phillips Head | 5 | 16 | Screw | 4 | 17 | Screw, Phillips Head | 4 | 19 | ALIGNMENT STICKER | 2 | 21 | PH SCREW M3*L6 | 14 | 22 | Cushion, Key, White | 23 | 23 | T611 PCMU | 1 | 25 | CABLE CLIP 1/4" | 2 | 26 | Screw, Phillips Head | 2 | 27 | CABLE HOLDER || W - AA5 | 2 | 28 | Overlay, Display | 1 | 29 | RING FOR LEFT CUP HOLDER | 1 | 33 | RING FOR RIGHT CUP HOLDER | 1 | 34 | SAFETY KEY STICKER || W - HB6 | 1 | 35 | MAGNET SENSOR PLATE | 1 | 36 | SAFETY KEY SENSOR PLATE | 1 | 37 | Screw, Mushroom Top | 1 | 38 | Wire, Ground | 1 | 39 | PH SCREW M5*P0.8*L10 | 1 | 40 | Washer, Spring | 1 | 41 | Washer, Serrated | 1 | 42 | CLEAR ISOLATION PLATE | 1 | 43 | PH SCREW M4*P0.7*L10 | 2 | 44 | SAFETY KEY BRD-BOARD ONLY | 1 | 45 | BAKELITE SLEEVE D8.9*d5.1*5mm | 2 | 46 | IC BRD SET PLATE | 1 | 47 | Screw, Mushroom Top | 2 | 048A | Safety Key | 1 | 048B | SAFETY KEY CORD EXPLANATION | 1 | 48 | Safety Key | 1 | 50 | Pedestal, Cable | 1 | 51 | CABLE -DISPLAY TO BRIDGE BRD | 1 | 52 | Cable, Data | 1 | 53 | HANDLEBAR ASSEMBLY STICKER | 1 | 54 | MSHRM PH M5*0.8*L8 | 1 | 55 | CABLE CLIP | 1 | 56 | ALIGNMENT STICKER | 2 | 57 | PH SCREW M4*L14 | 2 | 58 | WATER GUARD | 1 | 59 | Board, Bridge, Hub | 1 | 60 | BAKELITE SLEEVE D9*d5.1*L8 | 2 | 62 | SINGLE-SIDED TAPE | 4 | 63 | SCREW SOCKET | 2 | 65 | HANDLE LOWER COVER STICKER | 1 | 66 | Screw | 3 | 67 | Screw, Phillips Head | 14 | 68 | HNDLE LOWER CVR HOLE STICKER | 1 | 69 | HANDLE LOWER COVER STICKER | 1 | 70 | NLA COVER-HANDLE UPPER-LEFT | 1 | 72 | Cover, Handle, Lower, Left | 1 | 73 | Screw, Phillips Head | 4 | 74 | Screw | 2 | 76 | Screw, Phillips Head | 2 | 77 | Sticker, Round | 2 | 78 | Cover, Handle, Upper, Right | 1 | 79 | Cover, Handle, Lower, Right | 1 | 81 | Cover, Pedestal | 2 | 82 | Screw | 4 | 83 | STICKER-LEFT | 1 | 85 | Screw | 8 | 89 | CAP | 1 | 90 | SERRATED WASHER D18*d8.5*T2.0 | 2 | 91 | Screw | 4 | 92 | SCREW HEAD COVER, CURVED | 2 | 93 | SERR WASHER D18*d8.5*t2.0*19T | 10 | 94 | SCREW HEAD COVER | 2 | 96 | Wire harness, Data | 1 | 97 | TWIST TIE | 1 | 98 | Sticker, Cable Routing | 1 | 111 | Transmitter, HR | 1 | 113 | FILTER (FCC) | 1 | 114 | MADE IN TAIWAN STICKER | 1 | 115 | SPORTSART STICKER | 1 | 119 | Screw | 4 | 120 | Belt, Drive | 1 | 121 | Washer, Flat | 4 | 122 | SPRING WASHER M8 | 4 | 123 | HEX SCW M8*P1.25*L20 | 4 | 125A | OPTIC SENSOR BRACKET | 1 | 125B | Sensor, RPM | 1 | 125C | Disk, RPM | 1 | 130 | Wire harness | 1 | 132 | Board, Drive | 1 | 133 | PH SCREW M5*P0.8*L10 | 4 | 134 | PH SCREW M5*P0.8*L10 | 1 | 135 | CABLE CLIP 1/4" | 1 | 136 | Sticker, Right | 1 | 137 | Transformer | 1 | 138 | PH SCREW M5*P0.8*L10 | 2 | 139 | Sticker, Hot Wire | 1 | 140 | Sticker, Power Switch | 1 | 141 | NEUTRAL WIRE STICKER | 1 | 142 | Sticker, Ground Wire | 1 | 143 | PH SCREW M5*P0.8*L10 | 2 | 146 | Wire harness | 1 | 147 | FUSE HOLDER | 1 | 148 | Fuse | 1 | 149 | STICKER FOR FUSE | 1 | 149A | FUSE STICKER 15A FAST BLOW | 1 | 150 | Wire harness | 1 | 151 | Switch, Power | 1 | 152 | Connector, Power Cord | 1 | 153 | PH SCREW M5*P0.8*L10 | 1 | 154 | Washer, Spring | 1 | 155 | Washer, Serrated | 1 | 156 | PH SCREW M4*P0.7*L10 | 2 | 157 | Cord, Power | 1 | 157-1 | Power cord new style, 12 FT | 1 | 158 | VR box | 1 | 159 | INCLINE MOTOR Assembly | 1 | 160 | BUSHING | 1 | 166 | Wheel, Transport | 2 | 172 | PH SCREW M5*P0.8*L10 | 2 | 173 | DRIVE BELT COVER | 1 | 175 | STICKER-LEFT | 1 | 176 | PH SCREW M5*P0.8*L10 | 3 | 179 | PH SCREW M5*P0.8*L10 | 2 | 180 | Screw | 6 | 181 | Guide, Belt, Walking | 2 | 182 | FOAM TAPE | 6 | 183 | Sticker, SportsArt | 2 | 187 | Tape, Foam | 4 | 188 | SCREW SOCKET (METAL) | 8 | 189 | FLAT WASHER D17*d8*t1.5 | 2 | 190 | INNER HEX SCREW M8*L70 | 2 | 191 | FOAM STRIP 7*15*370 | 6 | 192 | LANDING STRIP GROMMET | 8 | 194 | Screw | 8 | 195 | LANDING STRIP SCREW CAP, BLACK | 6 | 196 | Screw, Landing, Strip | 2 | 201 | INNER HEX SCREW M5*L10 | 8 | 202 | MYFLEX CUSHION | 3 | 203 | CROSSBAR | 1 | 204 | Pad, Center | 2 | 206 | Roller, Front | 1 | 207 | Washer | 2 | 208 | DECK SCREW BUSHING D14*L25.5 | 2 | 209 | BEV HD INNER HEX M5 M8*P1.25*L40 | 2 | 212 | BEV HD IN HEX SCW M8*P1.25*L35 | 2 | 213 | DECK SCREW BUSHING D14*L20.1 | 2 | 214 | Washer | 2 | 215 | REAR ROLLER | 1 | 216 | Screw | 4 | 217 | FINGER GUARD (RIGHT) | 2 | 225 | WIRE - ON/OFF SWITCH TO FILTER-L | 1 | 226 | WIRE - ON/OFF SWITCH TO FILTER-N | 1 | 229 | Wire Harness, Optic Sensor | 1 | 230 | Sticker, Motor Warning | 1 | 231 | INNER HEX SCREW M6*L12 | 2 | 232 | INNER HEX SCREW | 2 | 233 | FLAT WASHER D12.7*d6.8*t1.0 | 2 | 401 | T611 OWNER'S MANUAL | 1 | 402 | Lubrication Kit | 1 | 403 | HARDWARE KIT (TOOLS ONLY) | 1 | 404 | DISPLAY SUPPORT PLATE | 1 | 405 | DISPLAY UPPER COVER+OVERLAY | 1 | 406 | DISPLAY LOWER COVER | 1 | 407 | DISPLAY CIRCUIT BRD | 1 | 408 | DISPLAY ASSEMBLY | 1 | 409 | Board, Bridge, Hub | 1 | 410 | Handlebar frame | 1 | 411 | COWLING LOWER COVER | 1 | 412 | Overlay, Keypad Lower | 1 | 413 | COWLING UPPER COVER ASSEMBLY | 1 | 414 | SAFETY KEY BRD AND ASSEMBLY | 1 | 415 | HBAR UP CVR W SAFETY KEY BRD | 1 | 416 | SAFETY KEY W/ GROUND WIRE | 1 | 417 | NLA End cap, Handlebar, Left | 1 | 418 | NLA End Cap, Handlebar, Right | 1 | 419 | PEDESTAL-LEFT | 1 | 420 | Pedestal, Right | 1 | 421 | WALK DECK COMP-UPGRADE T611-421 | 1 | 421-2 | # INCL GUIDE WHEEL W UPGRADE | 2 | 421-3 | Screw | 6 | 422 | TELEMETRY HEART RATE RECEIVER | 1 | 423 | Cover, Handlebar, Assembly | 1 | 424 | Hood | 1 | 425 | Motor, Drive | 1 | 425-1 | MOTOR BRUSHES - PAIR | 1 | 426 | Treadbelt | 1 | 427 | Switch, Bracket, Power | 1 | 428 | Motor, Incline | 1 | 428A | Nylon Gear, Large | 1 | 428A-1 | Nylon Gear, Small | 1 | 429 | INCLINE PIN, LOWER | 1 | 430 | PIN-LIFT MOTOR | 1 | 431 | Clevis Pin | 2 | 432 | Incline carriage | 1 | 433 | Pin, Hinge, Carriage, Incline | 2 | 434 | Holder | 1 | 436 | Foot, Leveler | 1 | 437 | Crossbar, front | 1 | 438 | CROSSBAR | 1 | 439 | Crossbar B, mid rear | 2 | 440 | Crossbar, rear | 1 | 441 | LANDING STRIP-LEFT Assembly | 1 | 442 | LANDING STRIP ASSEMBLY-RIGHT | 1 | 443 | Bolt, O-Ring, Bushing | 2 | 444 | Bolt, O-Ring, Bushing | 2 | | Treadbelt Lubricant, 4 oz | 1 | | Applicator, Lube | 1 | | POLAR HEART RATE SIMULATOR | 1 | | Deck | | |
T611 Exploded Diagrams
|
